QUICK REPAIRS-Use isophthalic NPG solution for repairing scratches or gouges on boat's finish COVER MORE SURFACE-Each quart of gelcoat will cover up to 20 square feet of marine boat surface SAIL THE HIGH SEAS-Withstand constant water sanding, compounding, repolishing with durability!! MEETS SAFETY REQUIREMENT-made with strict boating transportation & sanitary protectant standard CURES IN NO TIME-Watch it restore shine in 45 minutes to 4 hours to cure!! Description - With 5oz bottles of MEKP-925, White Gel Coat with Wax is to be used over fiberglass surfaces. This product is designed to cure to a tack-free finish. Restore scratch on boats, canoe, kayaks, jet ski, surfboard, bathtub, skate board, with clear or use coloring agents. Usage: ✅ After an initial wash, start the spring by hitting the hull with an oxidation remover and a buffer ✅ Polyester Gel-Coat White with Wax-One
Description - With 5oz bottles of MEKP-925, White Gel Coat with Wax is to be used over fiberglass surfaces. This product is designed to cure to a tack-free finish. Restore scratch on boats, canoe, kayaks, jet ski, surfboard, bathtub, skate board, with clear or use coloring agents.
Usage:
✅ After an initial wash, start the spring by hitting the hull with an oxidation remover and a buffer
✅ Polyester Gel-Coat White with Wax-One quart Iso Polyester base.
✅ UV stabilized for durable weather properties.
✅ Use no less than 1/2 % MEKP, no more than 2% MEKP. Mix thoroughly for 2 minutes.
✅ Pot life is approximately 15-25 minutes at 77 degrees Fahrenheit. Do not use under 60 degrees Fahrenheit.
✅ Complete cure is approximately 45 minutes to 4 hours.
White Gel Coat to be used over fiberglass surfaces. This product is designed to have a tacky finish. Features:Contains NO WAXHardener
White Gelcoat No Wax Coat Base with Hardener Fiberglass Marine Boat Repair 4 Gal
What's causing my edges to be white? I'm assuming it's my white gel coat bleeding into my resin? : r/Composites
Fiberglass Supply Depot Inc. White Gelcoat with Wax Interior or Exterior - Gallon with 60cc Hardener (MEKP)
True Composites Home
White Gelcoat with Wax Quart & 15cc MEKP Hardener
What's causing my edges to be white? I'm assuming it's my white gel coat bleeding into my resin? : r/Composites
Buy True Composites White Gelcoat No Wax-Isophthalic NPG Fiberglass Marine Gel Repair Kit-Top Coat Base, UV Protectant, Waterproof Cruise, Automotive,
True Composites White Gelcoat No Wax-Isophthalic NPG Fiberglass Marine Gel Repair Kit-Top Coat Base, UV Protectant, Waterproof Cruise, Automotive
1708 +/- 45 Biaxial Fiberglass (Multiple Package Sizes Available), TRUE COMPOSITES
Premium Gelcoat Repair Kit - Complete Set - TRUE COMPOSITES
Premium Polyester Resin: The Fiberglass Warehouse white gelcoat is made with highest quality modified polyester resin, providing enhanced flexibility
Fiberglass Warehouse Gel Coat – 1 Gallon White Gelcoat (No Wax) with 2 oz MEKP Catalyst, Easy Application Modified Polyester Resin – Durable and Safe